Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 33 van 286
Before the journey 3
B-MC I/T - 01/23-1 - EHG-0016-03EN 33
3.2.5 Rear garage / rear storage space
Observe the technically permissible maximum mass on the axle and
the technically permissible maximum laden mass when loading the
rear garage / rear storage space.
The maximum permitted load of the rear garage/the rear storage
space is 350 kg. If the vehicle is fitted with a caravan coupling or a
motorcycle rack, the permitted load is 450 kg. Do not exceed the tech-
nically permissible maximum mass on the rear axle.
Uneven loading or overloading has a negative influence on the driving
behaviour. In particular, a rear-heavy load leads to a relief of the front
axle due to the lever effects and thus e.g. to a loss of traction, a wor-
sened steering response (changed driving behaviour), an overload of
the tyres and thus to an increased risk of tyre bursts. This creates the
risk of the vehicle getting out of control and you endangering yourself
and other road users. An evenly distributed load over the entire ve-
hicle leads to optimal handling during the journey. If you are not sure
whether the laden vehicle complies with the maximum permissible
gross weight and the maximum permissible gross weight on the axle,
there is the possibility of weighing/checking the vehicle on public sca-
les or at individual dealers.
Do not exceed the maximum permissible external load on the rear
wall/rear flap. Only equipment components approved by the manufac-
turer are permitted (e.g. certain bike racks).
When transporting vehicles fuelled with petrol, diesel, gas or other
flammable material, ensure that the tank of the transported vehicle is
completely empty. When transporting e-bikes, we also recommend re-
moving the battery before commencing the journey and storing it sa-
fely.
Rear garages and rear storage spaces are not intended by the factory
as sleeping or living areas for persons or animals. These spaces have
no factory-provided ventilation. There is a danger of suffocation due to
the lack of oxygen.
Observe that only factory-fitted equipment components (e.g. storage
nets) are permitted on rear doors/rear flap.
Observe the maximum permissible load of 5 kg for the factory-attached
storage nets.
Depending on the vehicle equipment, clamping rails with clamping
eyelets are mounted in the rear garage or in the rear storage space. Al-
ways secure loads onto the clamping eyelets. Always use tightening
straps or lashing nets for securing the load, never rubber expanders.
When clamping loads, always check that the clamping eyelets are
placed tightly in the clamping rails. If the clamping eyelet is not anchored
tightly in the clamping rail, the load may slide or loosen during forcible
movements of the steering wheel or when braking.
Distribute the load evenly. Excessive spot loads can lead to damages of
the floor covering.
Use the supporting system offered by your dealer if two-wheelers are
transported in the rear garage.
Do not drill into the vehicle floor. Do not screw any screws into the ve-
hicle floor.
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
