Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 21 van 286
Before the journey 3
B-MC I/T - 01/23-1 - EHG-0016-03EN 21
3 Before the journey
Chapter overview
This chapter contains important information which has to be noted before
commencing your journey or carrying out any tasks before the journey.
At the end of the chapter there is a checklist which once again summarises
the most important points.
3.1 Initial start-up
During the initial journey and each time after changing a wheel, re-tigh-
ten the wheel bolts/wheel nuts after 50 km (30 miles). Subsequently in-
spect them at regular intervals in order to ensure that they are firmly se-
ated. See chapter 13 for tightening torque.
The motorhome is supplied with a set of keys, consisting of keys for the
base vehicle and keys for the body.
Always deposit a replacement key outside the vehicle. Make a note of the
key number. Our authorised dealers and workshops can offer assistance in
case of loss.
Further information in chapter 12.
When starting up for the first time or after a lay-up, the electrical system
must be started up as follows:
◼ Switch on the fuses or (if the fuses have been pulled out) insert the fu-
ses.
◼ Set battery cut-off switch to on.
◼ Switch 12 V power supply on.
The 12 V power supply must only be switched on in vehicles without
SCU (System Control Unit). On vehicles with SCU, the 12 V power
supply is activated automatically.
The vehicle is not ready for operation until the above measures have
been carried out.
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
