Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 125 van 286
Gas system 7
B-MC I/T - 01/23-1 - EHG-0016-03EN 125
7.8 Gas filter
If the gas pressure regulating system fails due to oiling or due to foreign
substances, no warranty claim can be made for the gas pressure regula-
ting system.
The gas filter (Fig. 135,1) must be checked periodically. When changing the
gas bottles, the filter pad must be replaced (see section 12.6).
Fig. 135 Gas filter
Further information can be obtained in the manufacturer's instruction
manual.
7.9 Changing gas bottles
When changing gas bottles, do not smoke or create any open fire.
When you have changed the gas bottle, check whether gas escapes
at the connection points and unions. Use a leakage search spray to
spray the relevant connection point or union. These agents are
available at the accessories shop.
The procedure described below applies to vehicles that are equipped
with a single gas connection. If the vehicle is equipped with an regulating
system: When changing the gas bottle, proceed as described for the re-
gulating system.
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
