Hydra Kool KFM-GL-40 handleiding
Handleiding
Je bekijkt pagina 8 van 14
2.
Refrigerated
equipment
At least once a month, clean the condenser unit
with a soft brush and a vacuum cleaner. Dust
and fluff prevent good air circulation. A dirty
condenser decreases the performance of the
equipment and increases energy consumption.
To access the condenser, remove the
compressor group protection grid, clean it
carefully, avoiding
touching
other components,
putting
it
back afterwards.
EN
According to the climate class (class 3) do not install the equipment
in
environments where the temperature is above 25 °C and the relative
humidity above 60%.
Place the equipment on site, so that the vent grille of the compressor group
and all the area around it
does
not
become obstructed, to allow for perfect air
circulation.
Equipment with remotely assembled condensing unit
If the equipment has a remotely assembled condensing unit, all the advice
for the aeration of the group incorporated in the cabinet is no longer valid,
however we continue to recommend assembling the condensing unit in a
cool place with good air circulation. All other advice and care should
continue to be respected, in order to achieve the best performance that the
equipments
were designed for.
For equipment with a remotely assembled condensing unit, this must be
the
average/high temperature type, with cooling capacity equivalent to that
specified in the technical features of the equipment and prepared for the
refrigerant gas indicated on the label.
The installation of the remote unit should be performed only by persons
properly qualified and recognized for this operation.
8
Bekijk gratis de handleiding van Hydra Kool KFM-GL-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hydra Kool |
| Model | KFM-GL-40 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1994 MB |
