Hydra Kool KFM-GL-40 handleiding
Handleiding
Je bekijkt pagina 13 van 14
EN
Most common problems
Problem Possible Cause Resolution
The heating elements do
The
unit is not connected to the power Connect the equipment into an
not heat after two minutes? outlet.
outlet with 230V~/50Hz or
115V~/60Hz in case it is prepared
for those power feed values.
The breaker that feeds the plug is off. Turn the breaker on.
The device has a malfunction. Contact the technical agent.
The device does not reach Broken heating element Contact the technical agent.
the set temperature?
Excess of exposed product. Remove product and distribute it
properly.
Open
doors
Close the doors.
The lamps do not light up?
The lighting
switch on the control panel Turn on the switch on the control
is off. panel.
Malfunction in fuse starters or lamps. Replace the lamps or the starters.
Malfunction in the electrical circuit of Contact the technical agent.
the device.
There is water spillage ? The tray is full. Empty the water tray.
The hose is out of the water tray. Place the hose in the correct
location on the water tray.
13
Bekijk gratis de handleiding van Hydra Kool KFM-GL-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hydra Kool |
| Model | KFM-GL-40 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1994 MB |
