Husqvarna-Viking Huskystar 215 handleiding

Naaimachine

Husqvarna-Viking

40 pagina's

PDF beschikbaar

Handleiding

Winding the Bobbin

1 Pull the handwheel out to dis en gage.

2 Draw the thread from the spool.

Guide the thread around the bobbin

winder thread guide.

3 Insert the thread through the hole in the

bobbin from the inside to the outside.

Put the bobbin on the bobbin winder

spindle.

4 Push it to the right.

5 With the free end of the thread held in

your hand, depress the foot control. Stop

the machine when it has made a few

turns, and cut the thread close to the

hole in the bobbin.

6 Depress the foot control again. When

the bobbin is fully wound, stop the ma-

chine. Return the bobbin winder spindle

to its original position by moving the

spindle to the left, and cut the thread.

7 Push the handwheel to the left to re-en-

gage. (original position).

NOTE: Return the bobbin winder spindle to the left

when the machine stops.

Bekijk gratis de handleiding van Husqvarna-Viking Huskystar 215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.