Husqvarna-Viking Designer Topaz 25 handleiding
Handleiding
Je bekijkt pagina 17 van 88
D
C
A
B
E
15S
ET UP
THREADING THE UPPER THREAD
Make sure the presser foot is raised and the needle is in the up
position
Press the ON/OFF switch to “O”.
1. Place the thread on the spool pin and the spool cap on the
spool pin as described on page 14.
2. Spool pin in horizontal position:
Bring the thread over and behind the pre-tension thread
JXLGH$DQGXQGHUWKHWKUHDGJXLGH%
Spool pin in vertical position:
Instead of bringing the thread into the pre-tension guide
$EULQJLWGLUHFWO\XQGHUWKHWKUHDGJXLGH%
3. Bring the thread down between the thread tension discs
&
4. Continue threading in the direction indicated by the
arrows. Bring the thread from the right into the slot on the
WDNHXSOHYHU'
5. Take the thread down and behind the last guide just above
WKHQHHGOH(
Bekijk gratis de handleiding van Husqvarna-Viking Designer Topaz 25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Husqvarna-Viking |
| Model | Designer Topaz 25 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 26684 MB |
