Husqvarna-Viking Designer Topaz 25 handleiding
Handleiding
Je bekijkt pagina 15 van 88

13SET UP
USB PORT
2QWKHULJKWVLGHRI \RXUPDFKLQH\RXZLOOÀQGD86%SRUWWR
connect your 86%VWLFN
Note: Make sure that the USB stick you use has the format FAT32.
CONNECT TO AND REMOVE FROM USB PORT
,QVHUWWKH86%VWLFNLQWKH86%SRUWRQWKHULJKWVLGHRI \RXU
PDFKLQH7KH86%SOXJFDQRQO\EHLQVHUWHGRQHZD\GRQRW
force it into the port!
7RUHPRYHFDUHIXOO\SXOOWKH86%VWLFNRXWVWUDLJKW
PACKING AWAY AFTER SEWING
3UHVVWKH212))VZLWFKWR´2µ
2. Unplug the cord from the wall socket and then from the
machine.
3. Unplug the foot control cord from the machine. Wind
the foot control cord and place it inside the space on the
underside of the foot control.
4. Check to ensure that all accessories are in the accessory
ER[6OLGHWKHER[RQWRWKHPDFKLQHEHKLQGWKHIUHHDUP
5. Place the foot control in the space above the free arm.
6. Put on the cover.
USING THE FREE ARM
6OLGHWKHaccessory box to the left when you wish to remove it
and use the free arm.
Use the free arm to facilitate sewing trouser legs and sleeve
hems.
To replace the accessory box, slide it onto the machine until it
ÀWVLQSODFH
Bekijk gratis de handleiding van Husqvarna-Viking Designer Topaz 25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Husqvarna-Viking |
| Model | Designer Topaz 25 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 26684 MB |







