Husqvarna-Viking Designer Ruby Royale Handleiding (134 Pagina's)

Handleiding

4:15Sewing

PERFECTLY BALANCED SENSOR

ONE-STEP BUTTONHOLE

The Exclusive SEWING ADVISOR

™

feature will select the

best buttonhole and stitch settings for your fabric. Fabric

should be interfaced and/or stabilized where buttonholes

are to be sewn.

You can also select your buttonhole directly from the

Buttonhole Menu B.

Fabric: Woven medium and stabilizer.

Select: Woven medium fabric and Buttonhole.

uSe: Size 80 needle as recommended.

1. Snap on the Sensor One-Step Buttonhole Foot.

2. Plug the cord into the socket (A) to the left above the

needle area.

3. Place your button on the buttonhole ruler on the

baseplate.

4. Set the size of the button in mm on your screen.

Before sewing, line up the white area on the side of the

wheel with the white marking line on the foot.

When sewing, your machine automatically sews the

buttonhole long enough to t the selected button size.

The buttonhole size needed will vary with the thickness and

style of your button. Always stitch a sample buttonhole on

scrap fabric rst.

Note: For woven heavy and leather, the Exclusive SEWING

ADVISOR

™

feature selects buttonholes that should not be sewn with

the Sensor One-Step Buttonhole Foot.

Sew the Buttonhole:

• Fold fabric in two and place stabilizer underneath.

Mark the buttonhole placement on your fabric with

your PICTOGRAM

™

Pen. Set the length of the

buttonhole.

• Place fabric under Sensor One-Step Buttonhole Foot.

The measurement wheel can be raised by lifting it,

which makes it easier to place the fabric under the

presser foot.

Note: Use the markings on the left toe of the Sensor One-Step

Buttonhole Foot to position the garment edge. Place the edge of the

garment at the middle mark to have 5/8’’ (15 mm) from the edge to

the buttonhole.

• Step on the foot control. The Sensor One-Step

Buttonhole Foot lowers automatically. A straight stitch

is sewn away from you stabilizing the left buttonhole

column, then the satin column is sewn toward you.

This is repeated for the right column. The bartacks are

automatic (see illustration 1). Keep the foot control

depressed until the Selective Thread Cutter cuts the

threads and the Sensor One-Step Buttonhole Foot is

raised.

Place fabric edge here to place

buttonhole 5/8'' (15 mm) from edge

Sensor One-Step

Buttonhole Foot socket

A

1. Sewing direction for satin stitch buttonholes sewn with

the Sensor One-Step Buttonhole Foot

Bekijk gratis de handleiding van Husqvarna-Viking Designer Ruby Royale, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.