Husqvarna-Viking Designer Ruby Royale Handleiding (134 Pagina's)

Handleiding

2:11Set up

OFF

ON

USB PORTS

Your machine has two USB ports: one to connect the

sewing machine to your computer, and one to connect

either your USB embroidery stick, optional USB hub or

optional mouse.

Note: Make sure that the USB stick you use has the format

FAT32.

USB EMBROIDERY STICK

Your machine comes with a USB embroidery stick. Use

the stick to store designs and other les, or to move les

between the computer and sewing machine.

CONNECT TO AND REMOVE FROM THE USB

PORT

Insert the USB embroidery stick or other devices in the

upper port. The USB plugs can only be inserted one way –

do not force them into the ports!

The USB PC cable packed with your machine

(P/N:412 62 59-04) plugs in to the lower port. No other

cable should be used in this port. Connect the other end of

the cable to your PC.

Note: Install the complimentary software before connecting the

machine to your PC. See page 2:12.

To remove, carefully pull the USB embroidery stick or the

plug of the USB cable out straight.

USING THE USB EMBROIDERY STICK

The External Device icon in File Manager is only activate

when a device is connected to the machine USB port.

When loading from or saving to the USB embroidery stick

an hourglass appears on the screen.

Note: Do not remove the USB embroidery stick when the hourglass is

shown on the screen or while the le manager is shown. Removing the

stick at that time can damage the les on your USB embroidery stick.

Note: The USB embroidery stick provided with the machine can be

left in the machine when putting on the hard cover. Make sure that the

cover of the USB stick is turned downwards.

External Device icon

Bekijk gratis de handleiding van Husqvarna-Viking Designer Ruby Royale, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.