Husqvarna-Viking Designer Ruby Royale handleiding
Handleiding
Je bekijkt pagina 30 van 134
3:10
Presser Foot Height
for Embroidery
Sensor Q-foot for embroidery
The Sensor Q-foot for embroidery is active by default
when you turn on the machine. When embroidering, using
the Sensor Q-foot, make sure that the ”Sensor Q-foot for
embroidery” is selected.
When using another type of foot, e.g., the R-foot,
deactivate Sensor Q-foot for embroidery. The deLuxe
™
Stitch System will then use Thread Tension instead of
Thread Portioning.
deLuxe™ Stitch System
The deLuxe™ Stitch System has two ways to control the
needle thread: Thread Tension and Thread Portioning.
When activated, the machine will automatically use Thread
Portioning if possible. Depending on your other settings,
the machine will automatically use Thread Tension in some
cases, e.g. when Free Motion is active.
Certain optional accessories or special techniques may
require the use of Thread Tension for best results. Deselect
the deLuxe
™
Stitch System icon to switch to Thread
Tension.
Read more about the deLuxe
™
Stitch System on page 4:9.
Presser Foot Height for Embroidery
Adjust the height of the presser foot in embroidery stitch-
out mode.
Some embroideries may build up under the presser foot.
If there is not enough space between the presser foot and
the embroidery, the top thread will form loops on the
underside of the embroidery. Increase the presser foot
height in small steps until the embroidery moves freely
under the presser foot.
Bekijk gratis de handleiding van Husqvarna-Viking Designer Ruby Royale, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Husqvarna-Viking |
| Model | Designer Ruby Royale |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 61053 MB |
