Husqvarna Aspire P4A 18-C100 handleiding
Handleiding
Je bekijkt pagina 6 van 212
Operation
WARNING: Pay attention to the mains voltage. The
voltage of the power source must match the voltage specified
on the rating plate of the charger.
• Make sure that the charging slot and the battery contacts are free of
coarse dirt. Ensure that the battery is fully inserted.
• The charging process begins as soon as the mains plug of the charger
is inserted into the mains socket and the battery is inserted into the
charging slot.
• The charging process is only possible when the temperature of the
battery is within the permitted charging temperature range (0–45 °C).
• Thanks to the intelligent charging process, the state of charge of the
battery is automatically detected and then charged up with the optimal
charge current depending on battery temperature and voltage.
• A significantly reduced operating time after charging indicates that the
battery has deteriorated and must be replaced.
• When the charger is used continuously, or for several consecutive
charge cycles without interruption, the charger may heat up. This
is, however, harmless and does not indicate that the charger has a
technical defect.
Battery charging times
The following table displays the approximate time required in minutes in
order to fully charge the battery, depending on the battery type. Charging
times can vary.
P4A 18-C100
Rechargeable 18V POWER FOR ALL system batteries 100% charged
1,5 Ah ≈30 min
2,0 Ah ≈34 min
2,5 Ah ≈43 min
3,0 Ah ≈51 min
4,0 Ah ≈59 min
4,0 Ah Power Plus ≈65 min
5,0 Ah ≈71 min
6 2345 - 002 -
Bekijk gratis de handleiding van Husqvarna Aspire P4A 18-C100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Husqvarna |
| Model | Aspire P4A 18-C100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11526 MB |
