Husqvarna 40-B140 handleiding
Handleiding
Je bekijkt pagina 5 van 200
To charge the battery
CAUTION: Make sure that the battery, the battery
charger and the terminals on the battery are clean and dry.
Do not put the battery in the battery charger if it is dirty or
wet.
1. Connect the battery charger to a power outlet. The charging LED
flashes 1 time.
CAUTION: Only connect the battery charger to
a power outlet with the voltage and frequency specified
on the rating plate.
2. Connect the battery to the battery charger. The charging LED comes
on.
3. Remove the battery from the battery charger when it is fully charged.
Push the battery indicator button for battery status. When all the LED
indicators come on, the battery is fully charged.
4. Pull the power plug to disconnect the battery charger from the power
outlet. Do not pull the power cord.
Battery LED indicator
The display shows the state of charge and if there are problems with the
battery.
LED indicator Battery status (state of charge)
40-B70, 40-B140
4 LED lights are on The battery is 76% - 100% charged.
3 LED lights are on The battery is 51% - 75% charged.
2 LED lights are on The battery is 26% - 50% charged.
1 LED light is on The battery is 6% - 25% charged.
1 LED light flashes The battery is 0% - 5% charged.
1648 - 003 - 07.11.2022 5
Bekijk gratis de handleiding van Husqvarna 40-B140, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Husqvarna |
| Model | 40-B140 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11046 MB |