Hunter Mazzini handleiding
Handleiding
Je bekijkt pagina 6 van 11
5
1886
1886
Ceiling Bracket Hanging FanDownrod Wiring Blades Cap Remote
Installing the Downrod
Hand tighten the downrod
(at least 4-5 full turns)
until it stops.
NOTICE
To prevent damage to fan,
ALWAYS lift holding either the
fan housing.
NOTICE
Make sure wires are not being
tangled while twisting.
K
E
E
P
!
Lift the adapter cover. Back out
the pre-installed setscrew so that
the setscrew’s threads are still
engaged while the shank does not
protrude and obstruct the insertion
of the downrod.
DO NOT
REMOVE
SETSCREW
COMPLETELY
Follow below if you are using the downrod that came pre-assembled in your box. Need to install a longer or shorter downrod? Check out the
guide at the end of this manual.
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
• ALWAYS tighten setscrew with pliers.
• DO NOT hand tighten setscrew.
• CHECK the setscrew is tight using pliers
each time you change fan direction.
• Pin must be reinserted to secure
downrod assembly
Remove product from packaging.
Hanging the Fan
S
l
i
d
e
c
a
n
o
p
y
o
v
e
r
d
o
w
n
r
o
d
a
n
d
w
i
r
e
s
.
Place the downrod ball into
the slot in the ceiling bracket.
NOTICE
To prevent damage to fan,
ALWAYS lift holding either the
fan housing or the downrod.
Fan style may vary.
Note:
Fan style may vary.
Note:
Tighten the setscrew with
pliers. DO NOT HAND
TIGHTEN. Lower the
adapter cover.
Making Connections for the Receiver and the Fan
Bekijk gratis de handleiding van Hunter Mazzini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hunter |
| Model | Mazzini |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3727 MB |
