Humminbird NMEA 2000 handleiding
Handleiding
Je bekijkt pagina 31 van 36
31
Installation
7. Confirm the Heading Sensor Operation
It is important to confirm that the Heading Sensor is installed correctly by
reviewing the heading digital readout.
NOTE
This procedure should be performed at slow speeds, in calm, open water, in a large
area that is far from shallow water, boats, or other obstacles.
XPLORE/APEX/SOLIX Series
1. Press the HOME key.
2. Select Settings > User Preferences > Units > Compass > Magnetic
North.
3. With a Sonar View displayed on-screen, navigate the boat in a straight
line, in calm, open water at 4.5 mph. Compare the Heading digital
readout on the screen with the Course (COG) digital readout. The
readouts should be within approximately 5° of each other.
Adjust: To adjust the zero point of the Heading Sensor, select Settings >
NMEA 2000 > Data Osets. Select Heading Adjustment. Tap the on/o
button, or press the ENTER key, to turn it on. Press and hold the slider, or
press and hold the ENTER key, to adjust the setting.
If the procedure failed: If the Heading digital readout is significantly
dierent than the COG, the Heading Sensor might be installed in a
location with too much magnetic interference. Check the installation
location and possible magnetic disturbances in the area.
Bekijk gratis de handleiding van Humminbird NMEA 2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Humminbird |
| Model | NMEA 2000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3843 MB |
