Huion Kamvas Pro 19 handleiding

457 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 4 van 457
GT1902
4
www.huion.com
Red light on: Sleep status
Light off: Not connected to power/pen display is not turned on
3
Slide Switch
Slide the switch left or right to disable or enable the finger touch function.
4 Full-functioned Type-C Port x 2 (Power Supply/Signal & Data Transmission)
Support reverse insertion. To connect monitors, video equipment, or other devices. Provide reverse
charging up to 40W for the connected computer/phone/tablet.
5 3.5mm Headphone Jack
To connect a 3.5mm connector.
6 Built-in Stand
Two built-in stands adjustable between to 20° provide the right viewing height and stable
support.
7 VESA Mounting Hole
With the 75 mm × 75 mm VESA hole pattern, you can mount the Kamvas Pro 19 pen display on a
variety of specification-compliant VESA brackets (available at HUION Store) or on other brackets
or arms for flexible adjustment of the angle and position of the pen display.
Note: As the Kamvas Pro 19 pen display weighs approximately 2kg, you should make sure that the bracket or arm
you purchase separately can support the weight, otherwise safety hazards may occur during installation.

Bekijk gratis de handleiding van Huion Kamvas Pro 19, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHuion
ModelKamvas Pro 19
CategorieNiet gecategoriseerd
TaalNederlands
Grootte99809 MB