Hughes & Kettner Vortex 112 handleiding
Handleiding
Je bekijkt pagina 6 van 40
REAR PANEL:
MAINS: Connect the included Euro-norm mains
cord to this socket. Ensure the amp's voltage
rating matches your local AC voltage rating
before you plug the cord into the wall socket.
SPEAKER OUTPUTS:
Serial on combos: Connect an auxiliary cabinet
with a minimum impedance of 2 ohms here.
Parallel on heads: Connect the included
4x12" cabinet and another auxiliary cabinet with
a rating of at least 8 ohms here. The minimum
permissible impedance is 4 ohms. This means if you
connect cabinets to both outs, each cabinet’s
impedance may be no lower than 8 ohms.
Combo-versions Head-version
3.0 STANDARD SETUP /
CABLE CONNECTIONS
HEAD/COMBO:
6
6
VORTEX - MANUAL
4.1 SELECTING CHANNELS
You can activate the channels of the VORTEX™
via the front panel CHANNEL SELECT button or an
external footswitch. The Hughes & Kettner
®
range
of accessories offers a footswitch that fits the bill,
the FS 1.
4.2 THE VORTEX™
AND SIGNAL PROCESSORS
The VORTEX™ is equipped with a serial effects
loop, meaning that the entire preamp signal is
routed to the FX device and processed there.
4.0 OPERATING THE VORTEX™
D-841 Vortex_Manual 1.2 25.06.2003 17:24 Uhr Seite 6
Bekijk gratis de handleiding van Hughes & Kettner Vortex 112, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hughes & Kettner |
| Model | Vortex 112 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4115 MB |
