Hughes & Kettner Duotone Tommy Thayer Signature Edition handleiding
Handleiding
Je bekijkt pagina 11 van 32
11
english
The Duotone® is connected properly, but no sound is audible.
•
One or several Gain or Master controls are turned all the way down. Dial
in higher settings.
•
A shorted external speaker cable caused one of the internal fuses to blow.
Have a qualified technician change the fuse (ensure the replacement fuse
bears the proper rating).
The sound is washed out and muddy when you activate a
connected effects device.
•
The signal processor is shifting the phase of the signal that is being blended
with the original signal in the parallel effects loop. Turn the FX LEVEL
knob clockwise to the far right to avoid this type of phase cancellation.
7Technical Specifications
Preamp Section:
Input -10 dBV / 1 M Ohm
FX RETURN 0 dBV / 1 M Ohm
FX SEND -10 dBV (+6 dBV)/8 K Ohm (15 K Ohm)
Power Amp Section
Output Power 100 watts into 4/8/16 Ohms
Frequency response 20 Hz - 50 KHz
General data
Input Power 230 volts AC (European version)
117 volts AC (North American version)
100 volts AC (Japanese version)
Max. Power consumption 470 VA
Power supply fuse T 2,5 A (230-volt version)
T 5 A (117-volt version)
T 6,3 A (100-volt version)
Anode Fuse 1 x T 1 A
Internal fuses 2 x T 250 mA
Operational temperature range -10°C - +35°C
Dimensions (W X H x D) 29.5" x 12.6" x 9.9" (750 x 320 x 250 mm)
Weight 22 kg, 48.4 lbs
Bekijk gratis de handleiding van Hughes & Kettner Duotone Tommy Thayer Signature Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hughes & Kettner |
| Model | Duotone Tommy Thayer Signature Edition |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5952 MB |
