Hughes & Kettner Attax Metroverb handleiding
Handleiding
Je bekijkt pagina 7 van 23
• Distortion devices are not designed for use in an FX loop. As
a rule of thumb, any kind of device that compresses the sig-
nal should be connected first in the signal chain. Depending
on the type of effect you want to achieve, you may want to
connect your compressor directly
between the instrument and the amp’s input.
• If you are using several processors or stomp boxes, ensure
you connect them in the proper order.
4.3 THE METROVERB AND MIXING CONSOLES
If you want to feed the METROVERB’s signal to a mixing conso-
le, we recommend you route it through a Hughes & Kettner
RED BOX. Patch the signal from the LINE OUT jack, as this signal
path’s level is not influenced by the MASTER setting. The RED
BOX balances the signal and simulates a speaker cabinet.
Bekijk gratis de handleiding van Hughes & Kettner Attax Metroverb, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hughes & Kettner |
| Model | Attax Metroverb |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1738 MB |
