Hudora Explory handleiding
Handleiding
Je bekijkt pagina 5 van 12
5/12
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the packaging
carefully in case questions arise in the future. Please always include these
instructions when handing on the product to a third party. This product
must be assembled by an adult. This product is designed for private / do-
mestic use only. This product is not designed for commercial / industrial
use. The use of the product requires certain capabilities and skills. Always
adjust according to the age of the user and use for the purpose it has been
designed for.
TECHNICAL SPECIFICATIONS
Item: Balance bike Explory 12"
Item number: 10930, 10931, 10932, 10933, 10934
Recommended leg height: 31 – 43 cm
Recommended body size: 90 – 110 cm
Item weight: approx. 4.5 kg
Maximum user weight: 25 kg
Purpose: Balance bike for beginners.
If you have assembly problems or would like further information on the
product, we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Balance bike with tools (see parts list p. 2)
1 x These instructions
Other parts which may be included with the delivery in some circumstances
are not required.
SAFETY INSTRUCTIONS
• WARNING! Protective equipment should be worn. Not to be used in traffic.
25 kg max.
• WARNING! Please ensure that your child wears the appropriate protec-
tive clothing (helmet).
• WARNING! The balance bike is not equipped with a braking system
since feet provide the motion power to the driving wheels. Therefore, it
is necessary to wear shoes while using the bike. There is a risk of injury.
• This toy has to be used with caution since the use of the product re-
quires specific skills and knowledge to be able to avoid injury to the user
and third parties through a crash or collision.
• This product is only suitable for smooth paved surfaces. Do not use it
on public roads.
• The balance bike is only intended for use by one person.
• Do not allow your child to ride the balance bike at twilight, at night or in
poor visibility.
• To prevent putting your child or others in danger, you should not let the
balance bike be used on roads or thoroughfares or on slopes or hills.
Avoid using it in the proximity of stairs or open water.
• Inspect the balance bike before each use to ensure that all parts are
still fixed in place correctly and that the balance bike is functioning as
intended.
• This product contains small parts if it is not assembled which could
cause asphyxia if swallowed. Supervise children during the assembling.
This product must be assembled by an adult.
• Children should only use the product when they are under adult super-
vision.
• Please ensure that your child keeps both hands securely on the handle-
bars in order to maintain better control over the bike.
• Recommended for use by children from approx. 30 months of age.
INSTRUCTIONS ON ASSEMBLY (Fig. 1 – 2)
1. The fork, handlebar stem and rear wheel are pre-assembled on the
frame (1) on delivery.
2. Unscrew the 4 Allen screws at the front of the handlebar stem complete-
ly and remove the front element of the handlebar clamp.
3. Position the handlebar (2) centrally in the recess of the handlebar stem
and then screw the front element back on. We recommend tightening
the 4 Allen screws only slightly at first and checking the correct position
of the handlebars again and adjusting them if necessary before tighten-
ing the screws.
4. Mount the front wheel (3). Ensure the correct direction of the wheel – it
must match the rear wheel pattern direction. First loosen the screws
with the washers from the axle and insert the axle ends into the holes at
the lower end of the fork.
5. Now screw the previously loosened screws and washers from the out-
side of the fork holes into the internal thread of the axles. Mount the
screws evenly to reduce the tension in the fork and ensure the front
wheel is centered.
6. Insert the saddle tube (4) into the frame to the desired saddle height and
tighten the fast lever. Make sure you do not exceed the maximum seat
height by not pulling the seat post out further than the „MAX“ mark,
as exceeding the maximum seat height can cause serious injury. Also
make sure that the saddle is correctly aligned parallel to the frame.
7. Finally, inflate the tyres.The maximum air pressure should not exceed
2.4 bar. When inflating, please make sure that the tube lies evenly in the
rim and is not twisted. The casing must also sit evenly on the rim and
must not push the tube in at any point.
To exchange the saddle tube unscrew the 3 screws on the lower side of the
saddle and lift the cover. Afterwards open the nut of the saddle post screw
and take it out. The saddle post (5) can be exchanged now. Follow all the
steps in the other direction with the longer saddle stem. Finally follow the
assembly instruction to assemble the saddle again.
MAINTENANCE AND STORAGE
Use only a dry or damp cloth to clean the product; do not use special clean-
ing agents! Check the product for damage or traces of wear and tear before
and after each use. Do not make any structural changes. For your own
safety, please use original spare parts only. These can be sourced from
HUDORA. If parts become damaged or if sharp edges or corners should
develop, the product may not be used any more. If in any doubt, please
contact our service team (http://www.hudora.de/). Store the product in a
safe place where it is protected from the elements, cannot be damaged,
and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collec-
tion point provided in your area. Local waste management companies will
be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise howev-
er, we put just as much effort into rectifying them. You can find numerous
information on the product, replacement parts, solutions to problems and
lost assembly manuals at http://www.hudora.de/.
All images are examples of the design.
EN INSTRUCTIONS ON ASSEMBLY AND USE
Bekijk gratis de handleiding van Hudora Explory, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hudora |
| Model | Explory |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1828 MB |
