Huawei SUN2000-15KTL-M5 handleiding
Handleiding
Je bekijkt pagina 95 van 97
F NS Protection
Connecting the Inverter to the NS Protection Signal Cable
NO TE
● The NS protection function applies to areas in compliance with the VDE4105 standard,
and the grid code needs to be set to VDE-AR-N-4105.
● The NS protection switch is connected to GND (pin 13) at one end and to DIN5 (pin 15)
at the other end. The switch is turned o by default. When the switch is turned on, NS
protection is triggered. Rapid shutdown and NS protection use the same pins, which are
GND (pin 13) and DIN5 (pin 15). Therefore, you can use only one of the functions.
● The NS protection switch connection is the same for a single inverter and for cascaded
inverters.
● Log in to the FusionSolar App as an installer, choose My > Device Commissioning, and
connect to the WLAN hotspot of the SUN2000. Log in to the local commissioning
system as an installer user, choose Settings > Feature parameters > Dry contact
function, and set Dry contact function to NS protection.
Figure F-1 Connecting cascaded inverters to the NS protection switch
SUN2000-(12KTL-25KTL)-M5 Series
User Manual F NS Protection
Issue 01 (2022-06-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 89
Bekijk gratis de handleiding van Huawei SUN2000-15KTL-M5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Huawei |
| Model | SUN2000-15KTL-M5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9842 MB |
