Huawei SUN2000-15KTL-M5 handleiding
Handleiding
Je bekijkt pagina 46 van 97
6.2 Powering On the System
Precautions
NO TICE
If the DC power supply is connected but the AC power supply is disconnected, the
inverter will report a Grid Failure alarm. The inverter can start properly only after
the power grid recovers.
Procedure
Step 1 At the AC switch between the inverter and the power grid, use a multimeter to
measure the grid voltage and ensure that the voltage is within the allowed
operating voltage range of the inverter. If the voltage is not in the allowed range,
check the circuits.
Step 2 Turn on the AC switch between the inverter and the power grid.
Step 3 Turn on the DC switch (if any) between the PV strings and the inverter.
Step 4 (Optional) Remove the locking screw next to the DC SWITCH on the inverter.
Step 5 Set the DC SWITCH to ON.
Step 6 Observe the LED indicators to check the status of the inverter.
Table 6-2 Indicator description
Category
Status Description
Running
indication
LED1 LED2 -
Steady
green
Steady green The inverter is operating
in grid-tied mode.
Blinking
green
slowly (on
for 1s and
o for 1s)
O The DC is on and the AC
is o.
Blinking
green
slowly (on
for 1s and
o for 1s)
Blinking green slowly
(on for 1s and o for
1s)
Both the DC and AC are
on, but the inverter is yet
to connect to the power
grid.
O Blinking green slowly
(on for 1s and o for
1s)
The DC is o and the AC
is on.
SUN2000-(12KTL-25KTL)-M5 Series
User Manual 6 Commissioning
Issue 01 (2022-06-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 40
Bekijk gratis de handleiding van Huawei SUN2000-15KTL-M5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Huawei |
| Model | SUN2000-15KTL-M5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9842 MB |
