HQ Power HQPL11003 handleiding
Handleiding
Je bekijkt pagina 4 van 47
HQPL11001/HQPL11002/HQPL11003
V. 02 – 18/10/2021 4 ©Velleman Group nv
4. Installation
4.1 Inspection before Installation
1. Take the chain out of the box and unroll it fully.
2. Make sure that the power plug is disconnected from the
power supply.
3. Check the plug, cable, insulation, lamp holders, and lamps
for damage:
o Replace any damaged lamps. See Fitting or
Replacing Lamps for detailed instructions.
o If you notice any other damage, do not use the chain
and contact your dealer.
4. Make sure that the lamp holders are dry and clean on the
inside and outside.
5. Check if the electrical connectors in the lamp holders are in
the correct position. One shall be flat at the bottom of the
socket, the other shall point upwards, as shown in the
image. If you find a socket with both connectors pointing
upwards, bend one down to match the other sockets.
Only do this when the power is disconnected.
OK
Not OK
4.2 Fitting/Replacing Lamps
1. Make sure that the power plug is disconnected from the
power supply. Do not replace lamps during rain or other
inclement weather conditions.
2. To replace a lamp, carefully unscrew the faulty lamp.
3. Fold down the rubber gasket over the lamp holder. This
makes it easy to fit the lamp.
Bekijk gratis de handleiding van HQ Power HQPL11003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HQ Power |
| Model | HQPL11003 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5394 MB |
