HP TX1 POS Solution 200 handleiding
Handleiding
Je bekijkt pagina 8 van 81
2. (optional) Connect the HP ngerprint reader or HP MSR to the bracket (1) and (2). Then connect to the
right or left side of the stand, using the included screws (3). Connect a USB cable to the component (4),
run the cable through the opening in the stand and through the cable clip and then connect the other
end to the adapter. See (1) and (2) in step 3 below.
3. Connect the tablet to the stand and to the HP ElitePad Connectivity and Smart AC Adapter, as follows.
Route the adapter cable through the opening in the stand (1) and through the cable clip (2).
NOTE: To open the cable clip, gently squeeze it to unhinge the right side.
Connect the adapter cable to the port on the bottom of the tablet (3).
Insert the tablet into the stand (4), and tighten the thumb screw to secure the tablet in the stand (5).
2 Chapter 1 Setting up the system
Bekijk gratis de handleiding van HP TX1 POS Solution 200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | TX1 POS Solution 200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13551 MB |
