Handleiding
Je bekijkt pagina 76 van 104
d. Insert the printhead into the slot until it clicks into place.
e. Close the printhead cover.
Make sure it is properly closed to avoid problems such as carriage jams.
4. Close the ink access door.
To clean printhead contacts
NOTE:
● Open the printhead cover and clean printhead contacts only when necessary; for example, if a printhead
cannot be detected.
The instructions here are only applicable in this section. After you have set up the printer, do not open
the printhead cover unless instructed to do so.
● The cleaning procedure should take only a few minutes. Make sure that the printheads are reinstalled
in the printer as soon as possible. It is not recommended to leave the printheads outside of the printer
longer than 30 minutes. This could result in damage to the printheads.
● Handle printheads with care. Do not drop the printheads, and do not touch the electric contacts or print
nozzles on any surface.
1. Make sure the printer is turned on.
2. Lift the ink access door.
NOTE: After you have set up the printer, do not open the printhead cover unless instructed to do so.
3. Press the blue button to open the printhead cover.
66
Chapter 8 Solve a problem
Bekijk gratis de handleiding van HP Smart Tank 7001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Smart Tank 7001 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 15822 MB |
