Handleiding
Je bekijkt pagina 20 van 104
Cause Solution
One of the following might have occurred:
– One or both printheads are missing.
–
One or both printheads are installed incorrectly.
– One or both printheads still have an orange plug or
plastic tape on them.
– One or both printheads are incompatible or
damaged.
– Make sure both printheads are properly installed.
– Install any missing printhead.
–
If both printheads are installed, remove the
printhead indicated, make sure there is no orange
plug or plastic tape on it, and then reinsert the
printhead securely.
– Make sure that you are using the correct HP
printheads for your printer.
For more information, see Printhead problem.
NOTE: Do not open the printhead cover unless
instructed to do so.
Printheads alignment icon
● The Number Counter icon shows an A or a blinking A, or a “racecourse animation”.
Cause
Solution
The printer is doing printheads alignment.
A racecourse animation appears on the display when the
printer is printing a printheads alignment page.
A solid "A" appears when the alignment page is printed.
A blinking "A" appears when the printer is scanning the
alignment page.
"A" disappears after the scan when printheads alignment
is complete.
After the alignment page is printed and the Open Lid
light blinks, place the printed page print-side
down on the scanner glass, close the scanner lid, and
then press the blinking copy button to scan the page.
Printheads alignment is complete after the scan.
To load an original. see Load paper.
● The Number Counter icon shows a blinking A. The Attention light and Resume light are blinking.
10
Chapter 1 Get started
Bekijk gratis de handleiding van HP Smart Tank 7001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Smart Tank 7001 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 15822 MB |
