Handleiding
Je bekijkt pagina 18 van 104
Table 1-7 Control panel error codes (continued)
Error code Cause Solution
For more information, see Jams and paper-feed issues.
CAUTION: Do not open the printhead cover.
E5 The scanner is not working. Turn the printer o, and then on again.
If the problem persists, contact HP. The printer can still print even if the
scanner is not working.
E6 The printer is in an error state. Restart the printer.
1. Turn o the printer.
2. Unplug the power cord.
3. Wait a minute, and then plug the power cord back in.
4. Turn on the printer.
If the problem persists, contact HP.
E7 One or more ink tanks are out of ink. Rell the indicated ink tank that is out of ink. See To rell the ink tanks.
E8 Fatal error. Turn the printer o, and then on again.
If the problem persists, contact HP.
E9 Firmware update error. Turn the printer o, and then on again.
If the problem persists, contact HP.
Power button light
Status Cause and Solution
On The printer is on.
O The printer is powered o.
Dimmed The printer is in Sleep mode. See Sleep mode.
Blinking The printer is turning on or o, or processing a job.
To cancel the job, press the Cancel button .
Fast blinking If the ink access door is open, close it.
If the ink access door is closed and the light is blinking
fast, the printer is in an error state. Check your computer
or device for any messages that can help provide more
information. If need, try printing a page to generate an
onscreen message.
8 Chapter 1 Get started
Bekijk gratis de handleiding van HP Smart Tank 7001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Smart Tank 7001 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 15822 MB |
