HP ProDesk 2 SFF G1i E handleiding
Handleiding
Je bekijkt pagina 43 van 124
8. Remove the four screws (1) that secure the drive to the drive cage, and then lift the cage (2) off the
drive.
To install a hard drive, reverse the removal procedures.
Memory modules (DIMMs)
To remove the memory modules, use this information and procedures.
Table 4-12
Memory module descriptions and part numbers
Description Spare part number
32 GB N77572-001
16 GB N77570-001
8 GB N77571-001
The memory sockets on the system board are populated with at least one preinstalled memory module.
To achieve the maximum memory support, you can populate the system board with up to 64 GB of
memory configured in a high-performing dual-channel mode.
For proper system operation, the DIMMs must adhere to the following specifications:
● Industry-standard 288-pin
● 1.1 volt DDR5-SDRAM memory modules
● DDR5-5600 SDRAM UDIMM
● Mandatory JEDEC SPD information
The computer supports the following setups:
● 512 Mbit, 1 Gbit, 2 Gbit, and 4 Gbit non-ECC memory technologies
36
Chapter 4 Removal and replacement procedures
Bekijk gratis de handleiding van HP ProDesk 2 SFF G1i E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | ProDesk 2 SFF G1i E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15941 MB |
