HP ProDesk 2 G1a E handleiding
Handleiding
Je bekijkt pagina 36 van 125
Static electricity can damage the electronic components of the computer or optional equipment.
Before beginning these procedures, be sure that you are discharged of static electricity by briefly
touching a grounded metal object.
NOTE: You can extend the lifetime of the lithium battery by plugging the computer into an AC outlet.
The lithium battery is used only when the computer is not connected to AC power.
HP encourages customers to recycle used electronic hardware, HP original print cartridges,
and rechargeable batteries. For more information about recycling programs, go to
http://www.hp.com/recycle.
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 19).
2. Remove the access panel (see Access panel on page 19).
Remove the battery:
1. To release the battery from its holder, squeeze the metal clamp (1) that extends above one edge of
the battery. When the battery (2) pops up, lift it out.
2. With the positive side up, insert the battery (1) onto the battery socket at an angle, and then press
the battery (2) down until it locks into place. The battery holder automatically secures the battery in
the proper position.
Battery
29
Bekijk gratis de handleiding van HP ProDesk 2 G1a E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | ProDesk 2 G1a E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16582 MB |
