Handleiding
Je bekijkt pagina 46 van 93
4. Remove the Phillips M1.6 × 2.0 screw (4) that secures the touchpad to the computer. Note that this
screw requires a Phillips P0 screwdriver.
5. Remove the touchpad from the computer (5).
To install the touchpad, reverse this procedure.
Top-cover camera
To remove the top-cover camera, use this procedure and illustration.
Table 5-5
Top-cover camera description and part number
Description Spare part number
Top-cover camera
NOTE: The top-cover camera cable is included in the Cable Kit, spare part number M03431-001. The
top-cover camera bracket is included in the Bracket Kit, spare part number M03436-001. The top-
cover camera thermal shield is included in the Plastics Kit, spare part number N39195-001.
N39206-001
Before removing the top-cover camera, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 34).
2. Remove the bottom cover (see Bottom cover on page 34).
3. Remove the battery (see Battery on page 35).
Remove the top-cover camera:
1. Remove the foil that covers the top-cover camera.
2. Release the ZIF connector (1) the top-cover camera cable is connected to, and then disconnect the
cable from the top-cover camera board.
Top-cover camera
39
Bekijk gratis de handleiding van HP ProBook x360 435 G10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | ProBook x360 435 G10 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 13041 MB |
