Handleiding
Je bekijkt pagina 68 van 144
Table 7-5 Rear view of printer
Feature Description
1 Telephone wall jack.
2 DSL (or ADSL) lter and cord supplied by your DSL provider.
3
Use a minimum 26 AWG phone cord to connect to the port on the printer.
CAUTION: To reduce the risk of re, use only No. 26 AWG or larger (For example, 24 AWG) UL Listed
or CSA Certied Telecommunications Line Cord.
You might need to connect the phone cord to your country/region adapter.
Set up the printer with DSL
Follow these steps to set up the printer with DSL.
1. Obtain a DSL lter from your DSL provider.
2. Connect one end of the phone cord to your telephone wall jack, then connect the other end to the Fax
port on the back of the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
Get additional phone cords for this setup if needed. You can purchase phone cords from electronics stores
that sell phone accessories.
3. Connect an additional phone cord from the DSL lter to the telephone wall jack.
If you encounter problems setting up the printer with optional equipment, contact your local service provider or
vendor for further assistance.
Case C: Set up the printer with aPBX phone system or an ISDN line
If you are using either aPBX phone system or an ISDN converter/terminal adaptor, make sure you do the
following:
60
Chapter 7Fax
Bekijk gratis de handleiding van HP OfficeJet Pro 9135e, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | OfficeJet Pro 9135e |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 20406 MB |
