Handleiding
Je bekijkt pagina 84 van 139
There are two dierent ways to set up the printer with your computer based on the number of phone ports on
your computer. Before you begin, check your computer to see if it has one or two phone ports.
● If your computer has only one phone port, you need to purchase a parallel splitter (also called a coupler), as
shown in the illustration (A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back.
Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the
front and a plug on the back).
● If your computer has two phone ports, set up the printer as follows:
Table 7-16 Rear view of printer
Feature Description
1 Telephone wall jack.
2
Use a minimum 26 AWG phone cord to connect to the port on the printer.
CAUTION: To reduce the risk of re, use only No. 26 AWG or larger (For example, 24 AWG) UL
Listed or CSA Certied Telecommunications Line Cord.
You might need to connect the phone cord to your country/region adapter.
3 Computer with modem.
4 Telephone.
Set up the printer on the same phone line as a computer with two phone ports
Follow these steps to set up the printer on the same phone line as a computer with two phone ports.
1. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a
telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the Fax port on the
back of the printer.
2. Connect a phone to the "OUT" port on the back of your computer dial-up modem.
76
Chapter 7Fax
Bekijk gratis de handleiding van HP OfficeJet Pro 9125e, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | OfficeJet Pro 9125e |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 18739 MB |
