Handleiding
Je bekijkt pagina 50 van 91
Redistributing toner l 50
Redistributing toner
When the toner cartridge is near the end of its life:
• White streaks or light printing occurs and/or density variation side to side.
• The Status LED blinks red. The toner-related message saying that the toner is low may appear on the
display.
If this happens, you can temporarily improve print quality by redistributing the remaining toner in the
cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the
toner. Replace the toner cartridge (see "Available supplies" on page 48).
• To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes.
Cover it with a piece of paper, if necessary.
• Do not touch the green area of the toner cartridge. Use the handle on the cartridge to avoid
touching this area.
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package.
They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot
water sets toner into fabric.
1
Open the front cover.
2
Pull the toner cartridge out from the machine.
Bekijk gratis de handleiding van HP Laser 30000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Laser 30000 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 8149 MB |
