Handleiding
Je bekijkt pagina 73 van 104
6. Remove the optical drive (see Optical drive on page 34).
7. Remove the hard drive (see {Xref Error! Target does not exist.})
8. Remove the keyboard (see
Keyboard on page 43).
9. Remove the top cover (see
Top cover on page 47).
When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Memory module (see
Memory module on page 38)
●
RTC battery (see
RTC battery on page 67)
● Fan and heat sink (see
Fan and heat sink on page 68)
●
PCH heat sink (see
PCH heat sink on page 71)
●
Processor (see
Processor on page 72)
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Display panel cable
(2) Optical drive cable
(3) USB board cable
(4) Power connector cable
2. Remove the PM 2.5 × 4.5 screw (1) that secures the system board to the base enclosure.
3. Lift the right side of the system board (2) until it rests at an angle.
Component replacement procedures 65
Bekijk gratis de handleiding van HP g6-2278sr, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | g6-2278sr |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 14963 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 2480 g |
| Breedte | 376 mm |
| Diepte | 244 mm |
| Hoogte | 36.3 mm |
