Handleiding
Je bekijkt pagina 70 van 104
10. If it is necessary to replace the wireless antenna cables and transceivers:
a. Release the wireless antenna cables from the clips (1) built into the display enclosure.
b. Release the wireless antenna transceivers (2) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
c. Remove the wireless antenna cables and transceivers.
Reverse this procedure to reassemble and install the display assembly.
USB board
Description Spare part number
USB board (includes cable) 683547-001
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 32).
5. Remove the service door (see
Service door on page 33).
6. Remove the optical drive (see
Optical drive on page 34).
7. Remove the hard drive (see {Xref Error! Target does not exist.})
62 Chapter 4 Removal and replacement procedures
Bekijk gratis de handleiding van HP g6-2034tx, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | g6-2034tx |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 14963 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Red |
| Gewicht | 2480 g |
| Breedte | 376 mm |
| Diepte | 244 mm |
| Hoogte | 36.3 mm |
