Handleiding
Je bekijkt pagina 44 van 75
To install the WLAN module, reverse this procedure.
I/O boards
To remove the I/O boards, use these procedures and illustrations.
Table 6-5 I/O board descriptions and part numbers
Description Spare part number
I/O boards (left and right, includes cables) P24053-001
I/O support brackets (available in the Bracket Kit) P24054-001
Before removing the I/O board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 25).
2. Remove the bottom cover (see Bottom cover on page 32).
3. Remove the battery (see Removing and reinstalling the same battery on page 26).
Remove the I/O boards:
1. To remove the large I/O board:
a. Remove the two outer Phillips M2.0 × 2.5 screws (1) that secure the bracket to the board.
b. Remove the two inner Phillips M1.4 × 4.0 screws (2) that secure the bracket to the board.
c. Remove the bracket (3) from the board.
d. Lift (do not remove) the tape (1) from the connectors on the board.
e. Disconnect the cables from the ZIF connectors (2) on the board.
f. Remove the two Phillips M2.0 × 2.5 screws (3) from the board.
38
Chapter 6 Removal and replacement procedures for authorized service provider parts
Bekijk gratis de handleiding van HP Fortis G1m, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Fortis G1m |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 11545 MB |
