Handleiding
Je bekijkt pagina 3 van 32
Introductory Information
4
Scanner software
The scanner software is installed in the scanner’s panel PC, and runs automatically when you switch on the panel PC.
The first screen that you see is divided into three main sections:
• The viewing section on the left, for previewing scanned images; with nine buttons above it that can be used to change
the preview
• The control section on the right, with four tabs containing options for Copy, Scan, Print and Setup tasks
• The toolbar on the bottom, with nine buttons that are described below
The Quit button shuts down the touch screen.
The Online Help button provides information on the use of the scanner.
The File Manager button opens the File Management dialog box.
The Print Queue button accesses the print queue.
The Collate button groups copies into sets.
The Preview button scans the document to preview the image and select an area of interest.
The Reset button resets settings to default values.
The Stop button cancels the current scanner activity.
The Copy button (in the Copy tab) starts copying. In the Scan tab, the Copy button starts scanning.
The Save button (in the Scan tab) saves scanned pdf les.
The Print button (seen in the Print tab) starts printing.
Create a media prole
To create a media prole your printer must be connected to a network.
You can create a media prole only for a paper type that is currently loaded in the printer installed through the network.
The media prole list includes the paper types with existing media proles and also the paper types currently loaded in
the printer (the latter shown with an asterisk). You can select one of the paper types loaded in the printer and create a
media prole as described below if it is not already created. You cannot change the names of the media proles.
In order to print, you must rst create a media prole, and you must have at least one printer connected to the scanner
over a network.
1. Check that the media prole you intend to create does not already exist in the media prole list. If the media prole
you want to create already exists, you must delete the existing one rst before you can install it again.
2. Clean and calibrate the scanner, unless that has already been done recently. See “Scanner calibration” on page 7.
3. Start media prole creation by selecting the Setup tab.
4. Press the Media Prole button, and then press the Tool button. (Alternatively: Printer > Tool > Media Prole).
Hewlett-Packard Company - Learning Products - Barcelona
Bekijk gratis de handleiding van HP DesignJet SD Pro MFP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | DesignJet SD Pro MFP |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 5935 MB |
