Handleiding
Je bekijkt pagina 9 van 78
HP Designjet 30/90/130 Printer series – Quick Reference Guide
8
English
How Do I Load Paper in the Input Tray? (30 Printer series)
1. Remove the tray.
2. Adjust the size of the tray if necessary. If the
paper you are using is larger than Legal- or
A4-size, extend the tray. For Legal- and A4-
size or smaller paper, use the tray in its
normal size. To adjust the size of the tray,
first slide the tray extension locking tab to
the left until it clicks. This unlocks the tray extension. To lengthen the tray,
pull the tray extension out as far as it will go. To make the tray shorter, push
the tray extension in as far as it will go. The tray extension locking tab will
click back to its normal position, locking the tray size.
3. Place the paper in the tray, to the right
and towards the printer.
4. Push in the small tab on the right of the
tray so that it fits snugly against the
paper.
5. Move the larger tab on the left of the tray to the right so that it fits snugly
against the paper.
6. Insert the tray into the printer, pushing it in as far as it will go. Note that if
the paper tray is extended, it will project out from the printer and must be
supported.
Bekijk gratis de handleiding van HP Designjet 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Designjet 90 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 10948 MB |
