Handleiding
Je bekijkt pagina 60 van 78
HP Designjet 30/90/130 Printer series – Quick Reference Guide
59
English
The Problem is a Flashing Tool Icon in the Front Panel
If there is a hardware error with your printer, this icon flashes on the front panel:
The precise error is indicated by a pattern of squares displayed in the ink
cartridge icons on the front panel.
Pattern Explanation Solution
Packaging not properly
removed, or printhead
carriage latch not properly
closed, or cutter badly
assembled
Error code: 86:11
Turn off the printer. Ensure that all
packaging is removed and that the
printhead carriage latch is properly
closed. Remove the rear path, lift the
cover, and check that there is no
paper jammed in the printer. Remove
and reinstall the cutter according to
the instructions in the User’s Guide.
The rear path has not been
correctly installed
Error code: 35:01
Remove the rear path, then reinstall it
(see page 44). You may have to
press the OK key to clear the error.
General printer system failure
Error code: 56:13
Unplug power cable, wait a few
seconds, plug in power cable and
turn printer on. If the problem
persists, call HP support.
General I/O failure
Error code: 65:04
Unplug power cable, wait a few
seconds. Connect alternative I/O if
available, plug in power cable, turn
printer on.
Bekijk gratis de handleiding van HP Designjet 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Designjet 90 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 10948 MB |
