Handleiding
Je bekijkt pagina 5 van 78
HP Designjet 30/90/130 Printer series – Quick Reference Guide
4
English
How Do I Load Sheets of Paper? (General Guidance)
There are four ways of loading sheets of paper into the printer if you have the
Automatic Roll Feed installed on your printer. There are three ways of loading
paper if you have the manual roll feed or no roll feed installed:
1. The input tray at the front of the printer for normal sheets of paper between:
• 76 × 142 mm (3 × 5.6 inches) and 457 × 610 mm (18 × 24 inches) (C+
or A2+). (90 and 130 printer series)
• 95 × 146 mm (3.74 × 5.75 inches) and 330 × 483 mm (13 × 19 inches).
(30 Printer series)
Envelopes can also be loaded in the input tray.
2. The front path for paper between:
• 95 × 146 mm (3.74 × 5.75 inches) and 330 × 483 mm (13 × 19 inches).
(30 Printer series)
•152×229 mm (6×9inches) and 458 × 1625 mm
(18.03 × 63.9 inches) (A2 oversize). (90 Printer series)
• 110 × 205 mm (4.3 × 8.1 inches) and 625 × 1625 mm (24.6 ×
63.9 inches) (D+ or A1+). (130 printer)
3. The rear path (upper slot), for single thick sheets of paper or other media
between:
• 95 × 146 mm (3.74 × 5.75 inches) and 330 × 483 mm (13 × 19 inches).
(30 Printer series)
• 76 × 205 mm (4 × 8.1 inches) and 458 × 1625 mm
(18.03 × 63.9 inches) (A2+). (90 Printer series)
extensions
to support
paper
output tray
1. input tray
3.rear path
(sheet/
manual
roll)
path
4. rear
(auto.
roll)
2. front path
Bekijk gratis de handleiding van HP Designjet 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Designjet 90 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 10948 MB |
