Handleiding
Je bekijkt pagina 36 van 78
HP Designjet 30/90/130 Printer series – Quick Reference Guide
35
English
How Do I Align Printheads?
If the printheads are not correctly aligned, poor quality printing will result.
To align printheads, you need to use the HP Designjet System Maintenance
utility. This is normally installed when you install the software (printer driver) for
your printer from the HP Designjet Driver and Documentation CD.
For some functions, the HP Designjet System Maintenance utility requires an
Internet connection, but you do not need this connection to perform printhead
alignment.
See “Tell Me About HP Designjet System Maintenance” on page 67.
To align the printheads:
1. Make sure that you have at least 5 sheets of A4 or Letter paper in the input
tray.
2. Start the HP Designjet System Maintenance. To do this, refer to “How Do I
Use HP Designjet System Maintenance?” on page 40.
3. Select Maintain printheads, then Align printheads.
4. The printer will print a printhead alignment sheet. Check that the sheet
printed has a tick on it. The tick should be cyan. If this is not the case, repeat
the process.
Bekijk gratis de handleiding van HP Designjet 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Designjet 90 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 10948 MB |
