Handleiding
Je bekijkt pagina 34 van 57
HP Designjet 70/110plus Printer series—Quick Reference Guide
33
If paper from the roll is jammed:
1. Turn off the printer.
2. Check in all places where the roll could be trapped:
• Remove the front paper tray. This will allow you to see inside the printer
through a slot in the front. Release and remove any trapped paper that is
visibly stuck.
• Lift the top cover, being careful not to damage or disturb any of the tubes or
other internal parts of the printer. If there is any paper trapped in the wheels
inside the printer, release and remove the paper.
• Unload the roll and remove it from its supports. If you are using the 70
Printer series, see “How do I unload a roll of paper? (70)” on page 17. If
you are using the 110plus Printer series, see “How do I unload a roll of
paper? (110plus Printer series)” on page 21.
• Remove the rear path by pressing the buttons on each of its sides and
pulling it straight out. If you don't pull it straight out, you may damage the
paper sensor. If there is any paper trapped in the rollers inside the printer,
release and remove the paper.
3. Once the paper jam has been cleared, replace any parts of the printer (paper
tray, top cover, roll spindle, rear path) that you have removed/opened, making
sure they fit securely.
4. Turn on the printer.
5. Before reloading the paper roll, you must trim the leading edge of the roll such
that this edge is perfectly straight and at right-angles to the sides of the roll.
The problem is that a roll of paper is jammed
Bekijk gratis de handleiding van HP DesignJet 70, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | DesignJet 70 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 10826 MB |
Caratteristiche Prodotto
| Kleur van het product | Zilver |
| Gewicht | 18500 g |
| Breedte | 17000 mm |
| Diepte | 670 mm |
| Hoogte | 225 mm |
