HP Color Laserjet Enterprise Flow MFP M681z Handleiding (264 Pagina's)

Handleiding

/ 264

Je bekijkt pagina 232 van 264

Table 9-1 Image defects table quick reference (continued)

Table 9-8 Fixing/fuser defects on page 222 Table 9-9 Image placement defects on page 222 Table 9-10 Color plane registrations defects

(color models only) on page 223

Table 9-11 Output defects on page 223

Image defects, no matter the cause, can often be resolved using the same steps. Use the following steps as a

s

tarting point for solving image defect issues.

1

. Reprint the document. Print quality defects can be intermittent in nature or can go away completely with

continued printing.

2

. Check the condition of the cartridge or cartridges. If a cartridge is in a Very Low state (it has passed the

rated life), replace the cartridge.

3

. Make sure that the driver and tray print mode settings match the media that is loaded in the tray. Try using

a dierent ream of media or a dierent tray. Try using a dierent print mode.

4. Make sure that the printer is within the supported operating temperature/humidity range.

5

. Make sure that the paper type, size, and weight are supported by the printer. See the printer support page

at

support.hp.com for a list of the supported paper sizes and types for the printer.

NOTE: The term “fusing” refers to the part of the printing process where toner is axed to paper.

The following examples depict letter-size paper that has passed through the printer short-edge rst.

218 Chapter 9 Solve problems ENWW

/ 264

Bekijk gratis de handleiding van HP Color Laserjet Enterprise Flow MFP M681z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.