HP Color Laserjet Enterprise Flow MFP M681z Handleiding (264 Pagina's)

Handleiding

/ 264

Je bekijkt pagina 192 van 264

NOTE: Fanning the paper introduces static electricity. Instead of fanning the paper, ex the stack by

holding it at each end and bringing the ends up to form a U shape. Then, rotate the ends down to reverse

the U shape. Next, hold each side of the stack of paper, and repeat this process. This process releases

individual sheets without introducing static electricity. Straighten the paper stack against a table before

returning it to the tray.

Figure 9-5 Technique for exing the paper stack

1

2

2. Use only paper that meets HP specications for this printer.

3. Verify that the humidity in the room is within specications for this printer, and that paper is being stored in

unopened packages. Most reams of paper are sold in moisture-proof wrapping to keep paper dry.

In high-humidity environments, paper at the top of the stack in the tray can absorb moisture, and it might

have a wavy or uneven appearance. If this happens, remove the top 5 to 10 sheets of paper from the stack.

In low-humidity environments, excess static electricity can cause sheets of paper to stick together. If this

happens, remove the paper from the tray, and ex the stack as described above.

4. Use paper that is not wrinkled, folded, or damaged. If necessary, use paper from a dierent package.

178 Chapter 9 Solve problems ENWW

/ 264

Bekijk gratis de handleiding van HP Color Laserjet Enterprise Flow MFP M681z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.