HP Color Laserjet Enterprise Flow MFP M681z Handleiding (264 Pagina's)

Handleiding

/ 264

Je bekijkt pagina 174 van 264

3. On the Device Information page, the default printer name is in the Device Name eld. You can change this

name to uniquely identify this printer.

NOTE: Completing the other elds on this page is optional.

4. Click the Apply button to save the changes.

Manually congure IPv4 TCP/IP parameters from the control panel

Use the control-panel Settings menus to manually set an IPv4 address, subnet mask, and default gateway.

1. From the Home screen on the printer control panel, swipe until the Settings menu displays. Touch the

Settings icon to open the menu.

2. Open the following menus:

●

Networking

●

Ethernet

●

TCP/IP

●

IPV 4 Settings

●

Cong Method

3. Select the Manual option, and then touch the Save button.

4. Open the Manual Settings menu.

5. Touch the IP Address, Subnet Mask, or Default Gateway option.

6. Touch the rst eld to open a keypad. Enter the correct digits for the eld, and then touch the OK button.

Repeat the process for each eld, and then touch the Save button.

Manually congure IPv6 TCP/IP parameters from the control panel

Use the control-panel Settings menus to manually set an IPv6 address.

1. From the Home screen on the printer control panel, swipe until the Settings menu displays. Touch the

Settings icon to open the menu.

2. To enable manual conguration, open the following menus:

●

Networking

●

Ethernet

●

TCP/IP

●

IPV6 Settings

3. Select Enable, and then select On.

4. Select the Enable Manual Settings option, and then touch the Done button.

5. To congure the address, open the Address menu, and then touch the eld to open a keypad.

160 Chapter 8 Manage the printer ENWW

/ 264

Bekijk gratis de handleiding van HP Color Laserjet Enterprise Flow MFP M681z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.