Handleiding
Je bekijkt pagina 61 van 96
Table 6-12 Touchpad description and part number (continued)
Description Spare part number
Touchpad cable N36072-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 39).
2. Remove the bottom cover (see Bottom cover on page 39).
3. Remove the battery (see Removing and reinstalling the same battery on page 33).
4. Remove the system board (see System board on page 51).
Remove the touchpad:
1. Remove the Mylar that secures the speaker cable, and then remove the cable.
2. Remove the four Phillips M2.0 × 2.5 screws (1) that secure the touchpad bracket to the computer,
and then remove the bracket (2).
3. Remove the protective tape from the top of the connector on the touchpad (1).
4. Disconnect the cable (2) from the touchpad ZIF connector.
5. Peel the large black Mylar off the top of the touchpad (3).
6. Remove the three broadhead Phillips M2.0 × 2.0 screws (4) that secure the touchpad to the
computer.
54
Chapter 6 Removal and replacement procedures for authorized service provider parts
Bekijk gratis de handleiding van HP 250R G10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | 250R G10 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 12711 MB |
