Handleiding
Je bekijkt pagina 49 van 96
Table 6-3 Memory module descriptions and part numbers (continued)
Description Spare part number
Memory module, 4 GB L83673-005
Before removing a memory module, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 39).
2. Remove the bottom cover (see Bottom cover on page 39).
3. Remove the battery (see Removing and reinstalling the same battery on page 33).
If you are replacing a memory module, remove the existing memory module:
■
Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then
remove the module (2). Use the same procedure to remove all memory modules.
IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
To install a memory module:
1. Align the notched edge of the module with the tab in the slot (1), and then press the module into the
slot at an angle until it is seated (2).
42
Chapter 6 Removal and replacement procedures for authorized service provider parts
Bekijk gratis de handleiding van HP 250R G10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | 250R G10 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 12711 MB |
