Handleiding
Je bekijkt pagina 4 van 32
4 49-5000885 Rev. 3
Remote Control Features and Settings-Cooling Only
10. Louver UP/DOWN Button
Press the LOUVER UP/DOWN button to choose the
position of the horizontal airflow louvers.
Status display of air flow
COOL/DRY:
HEAT:
NOTE:
• It is advisable not to keep the vertical louver in the
downward position for an extended period of time in
COOL or DRY mode, otherwise condensate water
may form on the louver.
• When turning the unit on, the remote control will
automatically return the louver to the previous set
swing position. When turning the unit off, the louver
will rotate to the full open position prior to closing.
11. Louver SIDE/SIDE Button (select models)
Feature is not available
12. ECO Button
For 1H09HN2CAA, 1H12HN2CAA, 1H18HN2CAA
and 1H24HN2CAA models:
Press ECO button repeatedly to select each step.
1st Press: Level 3 Eco - Reduces some energy
consumption
is displayed on the display screen.
2nd Press: Level 2 Eco - Additional reduction in
energy consumption
is displayed on the display screen.
3rd Press: Level 1 Eco - Greatest reduction in
energy consumption
is displayed on the display screen.
Note: ECO modes will reduce the compressor
operation frequency and increase the time needed
to reach temperature set point. To exit ECO mode,
press ECO Button a fourth time.
FOR ALL OTHER MODELS:
Feature is not available.
13. TIMER ON Button
Press the turned ON button, TEMP+/TEMP–
button is pressed with the length of time increment/
decrement in 0.5 hour between 0-12 hours,and 1
hour increment/ decrement between 12-24 hours
1. press the CONFIRM/CANCEL button,Timer
being set. When the remote is set to ON, the
system will turn off until the countdown timer ends.
Then the indoor unit will turn on and operate in
mode, temperature setting and fan speed that was
displayed when timer was set.
14. TIMER OFF Button
Press the turned OFF button, TEMP+/TEMP–
button is pressed with the length of time increment/
decrement in 0.5 hour between 0-12 hours,and 1
hour increment/decrement between 12-24 hours
1.press the CONFIRM/CANCEL button,Timer being
set. When the remote is set to OFF, the system will
remain ON until the countdown timer ends. Then the
indoor unit will turn OFF.
15. CONFIRM/CANCEL Button
Confirm timing function.
16. LOCK Button
Used to lock buttons and LCD display, use a pen
point or a similar object to depress this button.
17. LIGHT Button
The indoor display panel will show indoor set
temperature by default. Press this button once, it will
display the room temperature. Press this button twice
within 3 seconds, it will turn off the indoor display
panel. Press again to go back to display indoor set
temperature.
18. RESET Button
If the remote control is not functioning properly, use a
pen point or a similar object to depress this button to
reset the remote.
REMOTE CONTROL FEATURES AND SETTINGS
NOTE FOR 1H12HN2CAB, 1H18HN2CAB AND 1H24HN2CAB MODELS:
7RDFKLHYHPRVWHႈFLHQWRSHUDWLRQRSHUDWHWKHLQGRRUXQLWZLWKIDQVSHHGLQ$XWRPRGH,Q&RROLQJPRGHXVHD
set temperature of 78°F (25.5°C) or higher.
Bekijk gratis de handleiding van Hotpoint HW12HN2DAB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HW12HN2DAB |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3662 MB |
