Handleiding
Je bekijkt pagina 17 van 99
EN / 17
4.5 Hot Surface Warning
The side walls of your product are equipped
with cooler pipes to enhance the cooling
system. High pressure fluid may flow
through these surfaces, and cause hot sur-
faces on the side walls. This is normal and
it does not require servicing.
5 Preparation
Read the “Safety Instructions” first!
5.1 What To Do For Energy Saving
• This refrigerating appliance is not inten-
ded to be used as a built in appliance.
• When loading the food, leave enough
space inside the refrigerator to allow suf-
ficient air circulation for cooling.
• Since hot and humid air will not directly
penetrate into your product when the
doors are not opened, your product will
optimize itself in conditions sufficient to
protect your food. Under these circum-
stances, functions and components such
as compressor, fan, heater, defrost, light-
ing, display and so on will operate ac-
cording to the needs by consuming min-
imum energy.
• In case that multiple options are present,
glass shelves must be placed so that the
air outlets at the rear wall are not blocked
and preferably, in a way that air outlets
remain below the glass shelf. This com-
bination may help improving air distribu-
tion and energy efficiency.
• Using the below drawer when storing is
strongly recommended.
• For optimum performance, Quick Freez-
ing can be used (if available), 24 hours
prior to placing fresh foods in the freezer.
• In most cases, 24 hours is enough for the
Quick Freezing function after fresh foods
are placed in the freezer. After some
time, Quick Freezing function will deactiv-
ate automatically.
• When freezing a small amount of food,
Quick Freezing function can be deactiv-
ated after some time to ensure energy
saving.
• Food shall be stored using the drawers in
the cooler compartment in order to en-
sure energy saving and protect food in
better conditions.
5.2 First Use
Before using your product make sure the
necessary preparations are made in line
with the instructions in "Safety Instructions"
and "Installation" sections.
• Wait for at least 2 hours before operating
the product, to ensure the complete effi-
ciency of refrigeration.
• Keep the product running without placing
any food inside for 6 hours and the
product door should be kept as closed as
possible.
• The temperature change caused by open-
ing and closing of the door while using
the product may normally lead to con-
densation on door/body shelves and
glassware placed in the product.
• A sound will be heard when the com-
pressor is engaged. It is normal for the
product to make noise even if the com-
pressor is not running, as fluid and gas
may be compressed in the cooling sys-
tem.
• It is normal for the front edges of the
product to be warm. These areas are de-
signed to warm up in order to prevent
condensation
• For some models, indicator panel turns
off automatically 1 minute after the door
closes. It will be reactivated when the
door is opened or any button is pressed.
EN
IT
EL
Bekijk gratis de handleiding van Hotpoint HPAD2 6472 XP5E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HPAD2 6472 XP5E |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 8196 MB |
