Handleiding
Je bekijkt pagina 22 van 52
EN / 22
1. Draw a straight vertical line from the
center of the back wall of the area
where you will place the product.
2. Using the center as a reference, fix the
anti-tip stability device to the wall in ex-
act dimensions according to the dimen-
sions given below.
An anti-tip stability device is sup-
plied with the product. You can use
this piece on the right or left. The
relevant dimensions for both sides
are given above. The installation is
shown on the left as an example.
3. Place the anti-tip stability device you
fixed to the wall into the slot on the back
of the product as shown below.
4.2 Electrical connection
• Disconnect the product from the electric
connection before starting any work on
the electrical installation. There is an
electric shock hazard.
• Connect the product to a grounded out-
let/line protected by a miniature circuit
breaker of suitable capacity as stated in
the "Technical specifications" table. Have
the grounding installation made by a
qualified electrician while using the
product with or without a transformer.
Our company shall not be liable for any
damages that will arise due to using the
product without a grounding installation
in accordance with the local regulations.
• The product can only be connected to the
mains electricity connection by an au-
thorized and qualified person, and the
warranty of the product starts only after
correct installation. The manufacturer
cannot be held responsible for any dam-
ages that may arise due to operations by
unauthorized persons.
Bekijk gratis de handleiding van Hotpoint HDE6IDC2SA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hotpoint |
| Model | HDE6IDC2SA |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5361 MB |
